- Description
- Additional information
- Brand
Description
DESCRIPTION
A beige, smooth crepe paper masking tape with a pressure-sensitive natural rubber adhesive. Offers an excellent balance of quick stick, panel adhesion and holding properties. Recommended for most paint masking applications where excellent cornering with clean removal is desired. Will support masking paper aprons at 70°C for 30 minutes. Not recommended for outdoor exposure. Designed for narrow roll width applications to a variety of surfaces. Can be exposed to forced drying conditions for 30 minutes at 163°C with clean and easy one piece removal after bake from a hot to warm surface. Special release coating provides an “extra measure’ of moisture and solvent resistance. Especially suited for marine/fiberglass mold masking.
PRODUCT APPLICATION
Interior paint masking, spray painting (air-dry) autos, boats, etc., boat manufacturing (fiberglass), silk screening, mail rooms, marble manufacturing (man-made), golf club shaft (build-up), carpet pad / pad splicing, freezer tape, and light bundling, packaging, splicing and tabbing.
NOMINAL VALUES
The following data are nominal values based on PSTC, ASTM and other standard tests. The data should not be considered as specifications.
Backing: Fine Crepe Paper
Adhesive: Natural Rubber/Resin
Adhesion to Steel: (oz/in of width) 30 (8.2 N/25mm)
Tensile Strength: (lbs/in of width) 25 (109 N/25mm)
Elongation (% at break): 10
Total Thickness (mils): 6.3 (0.16mm)
Quick Stick (oz/in of width): To Kraft 8: (2.2 N/25mm) / To Steel: 17 (4.6 N/25mm)
Temperature Operating Range: +10°C ~ +93°C
Additional information
UOM | PC |
---|---|
Packing | 1 | 9 | 36 |
Catalogue | Page 92 | Image B |
Brand | INTERTAPE |
Tape Size | 24 mm x 50 m |
Colour | Creme |